Mag IPTV BOXES supported Adapters & Configuring a Wi-Fi connection
0
0
0
Supports Wi-Fi adapters
STB MAG-200/245/250/254/255/270/275 supports the following Wi-Fi adapters:
| Model | Chipset | Revision/Notes | |
|---|---|---|---|
| ASUS USBN13 | Ralink RT3072 | revision B1 is not supported |  |
| DLink DWA125 | Ralink RT3070 Ralink RT5370 |
H/W Ver.: A1, A2 (A3 – after release 0.2.12) |
 |
| DLink DWA125 | Ralink RT5370 | H/W Ver B1 – beginning with version 0.2.16.b2 |  |
| D-Link DWA-160 Wireless N Dualband (2.4GHz, 5GHz) USB Mini Adapter HW ver. B2 | Ralink RT5572 | HW ver. B2 – beginning with version 0.2.16.b2 |  |
| Edimax EW-7711UAN | Ralink RT3070 |  |
|
| Edimax EW-7733UnD 450Mbps Wireless 802.11a/b/g/n Dual-Band USB Adapter | beginning with version 0.2.16.b2 |  |
|
| Tenda W311MI | Ralink RT5370 | after release 0.2.12 |  |
| TPLINK TLWN727N | Ralink RT3070 | after release 0.2.12 H/W Ver.:v4 – not supported! |
 |
| Dune HD Air | Ralink RT3070 | after release 0.2.12 |  |
| CISCO Linksys WUSB600N Wireless N Dualband (2.4GHz, 5GHz) USB Mini Adapter | beginning with version 0.2.16.b2 |  |
|
| LogiLink WL-0145 Wireless N 150Mbps USB Adapter | Ralink RT5370 |  |
|
| AuraHD air/AuraHD air nano | Ralink RT5370 | after release 0.2.12 |   |
The order of installation / connection of devices
The STB supports hot-plugging for USB devices. Before connecting the device, you must first configure the settings menu STB.
After configuration, connect the Wi-Fi adapter into an available USB connector. After a while (20-30 seconds) the device is ready to work. Device status can be checked on the tab “Network INFO”.
Supported authentication/encryption methods
| ASUS USB‐N13, D‐Link DWA‐125, Edimax EW‐7711UAN, TP‐LINK TL‐WN727N, Dune HD Air, Tenda 150Mbps Wireless N Pico USB AdapterW311MI | |
|---|---|
| Open system / none | + |
| Open / wep64 | + |
| Open / wep128 | + |
| Shared / wep64 | + |
| Shared / wep128 | + |
| WPAPSK / AES,TKIP | + |
| WPA2PSK / AES,TKIP | + |
Environment Variables
| wifi_int_ip | Specifies the IP address to be assigned to a wireless network interface. If the specified «0.0.0.0», then use the auto configuration of network settings (receive from the DHCP server) |
| wifi_int_mask | Network mask |
| wifi_int_gw | Gateway |
| wifi_int_dns | DNS server address |
| wifi_ssid | Network Group (SSID) |
| wifi_auth | Authentication method «open», «shared», «wep_auto», «wpapsk», «wpa2psk» |
| wifi_enc | Method of encrypting traffic «none», «wep», «wep64»(deprecated), «wep128»(deprecated), «tkip», «aes» |
| wifi_wep_def_key | The default key for the encryption mode WEP64 и WEP128 |
| wifi_wep_key1, wifi_wep_key2, wifi_wep_key3, wifi_wep_key4 | 4 keys to set the encryption mode for WEP64 and WEP128 |
No comments